Electro-Hydraulic Baler Press, V-Press 818 plus, HSM

Thanks to its low transport height, the HSM V-Press 818 can be easily transported to wherever it needs to be used. To fill the press, the upper half of the doors is pushed down and automatically opens after the compression process. Hand wheel door lock - Easy to handle thanks to counter-rotating thread for quick opening and closing. Low installation height and small footprint. Suitable for cardboard as well as film. Automatic start of the pressing process after closing the door. Convenient membrane keypad with text display, which shows the current status of the machine.
HSM TCS (Torsion Control System) for monitoring press ram movement.
Bale strapping with polyester tape.

Technical data:
Pressing power: 185 kN
Specific pressing power: 19,23 N/cm²
Driving power: 4 kW
Voltage / Frequency: 400 V / 50 Hz
Cycle time when idling vacío: 27 s
Volume throughput in idle operation (theor.): 5 m³/h
Loading height: 958 mm
Loading aperture width x height: 1195 x 530 mm
Bale length x Bale width x Bale height: 1200 x 780 x 700 mm
Bale weight: 200 kg
Width x Depth x Height: 1700 x 1046 x 2370 mm
Weight: 1031 kg
Type of consumables: Strapping tape
Press material: Plastic film, Mixed paper, Cardboard, Punch waste/residue, Clothing